Flatbed truck on the highway hauling large rolls of metal wire

What you need

Drive a Flatbed

Class A CDL for tractor-flatbed combinations (Class B for heavy straight flatbeds)

Your test checklist

Each test below has a practice quiz and a flashcard game.

  1. Step 1

    Class A General Knowledge & Combination

    The base license for most flatbed rigs.

    Quiz & flashcards →
  2. Step 2

    Cargo Securement

    Tie-downs and load rules. Part of the General Knowledge test.

    Quiz & flashcards →
  3. Step 3

    Air Brakes

    Pick the Air Brakes section in this test. Without passing it, your license gets an air brake restriction.

    Quiz & flashcards →
  • There is no separate flatbed endorsement, but cargo securement questions appear on your test.

Study advice

Flatbed safety depends on a securement system that is both strong enough and correctly arranged. Memorizing a tiedown count is not enough: length, weight, forward blocking, attachment method and commodity-specific rules all matter.

  • Prevent rolling as well as sliding.
  • Check commodity-specific requirements before using the general rules.
  • A 20-foot unblocked general article needs at least 3 tiedowns.
  • A 20-foot forward-blocked general article needs at least 2 under the general count rule.
  • Count and aggregate strength must both be adequate.
  • Attachment method affects how much WLL counts.
Read the full study guide →

Requirements can vary by state. Always check your state's official CDL manual.